Build a Voltage Controlled Slope Generator Module!

Hosted by Modular for the Masses
Saturday, Sept 6 @ 2pm
Difficulty: Easy

VCSlopeBuild

Build your own voltage controlled slope generator module with guidance from Juanito!

Here's yet another slope generator! This 8hp Eurorack module started with a faithful copy of a Serge voltage-controlled slope generator with a few tweaks and two added features. The slope generator is the modular world's most versatile device, it can be a VCO, an LFO, an envelope generator, envelope follower, a transient detector, a pulse delay, an audio filter, and more! These guys work best in multiples which is why they so often appear as DualUSGs or Maths etc. This particular slope generator gives the user voltage control over the rise and fall shape, exponential voltage control over the rate (labelled V/Oct, but it's not calibrated or temperature compensated), it has an attenuverter at the end of the signal chain, and a gate output that goes high when the signal is falling. The shape controls have been made more sensitive than Serge's design, and tweaked to make it easy to get a nice linear slope at the 12 o'clock position.

TO PARTICIPATE IN THIS WORKSHOP
You will need to purchase the VCSlope Kit from Modular for the Masses by sending $135 via paypal by clicking THIS LINK and put VCSlope Workshop in the description.

Some kits may be available for purchase on-site, however, you can secure your place in the workshop by pre-ordering your kit.